Written scope
Clear quote before we start
When your old tank starts leaking or your hot water runs out before your shower does, you need water heater installation Rockville MD homeowners can count on. We install Rheem, AO Smith, Navien, and Rinnai units in homes and businesses across Montgomery County. Our team handles the full job: removal, disposal, new connections, and code-compliant startup. You get hot water back the same day in most cases, with upfront pricing before we start.
Every install is different, but most jobs include the same core work. Here is what you get when we install a new water heater. If you need extras like a new gas line or a tankless conversion, we quote those upfront so there are no surprises.


We install tank and tankless water heaters in houses, townhomes, and condos across Rockville. Whether you need a 40-gallon swap or a tankless upgrade, we handle the removal, install, and cleanup.
We install commercial-grade water heaters for restaurants, salons, offices, and multi-family buildings. We work after hours to keep your business open and your tenants comfortable.
Water heater installation Rockville MD is the process of removing your old unit, connecting a new tank or tankless heater to your home's water and gas or electrical lines, and bringing everything up to current Maryland plumbing code. It is not just swapping a tank. We drain the old unit, disconnect gas or power, inspect the shut-off valve and expansion tank, check for corrosion on the fittings, and make sure the new heater sits level and vents correctly. A standard 40- or 50-gallon tank swap takes three to five hours. Tankless conversions can run a full day because we upsize gas lines and run new venting.
Most Rockville homes were built between the 1950s and 1990s, and many still have the original 40-gallon tank in a basement or utility closet. When those units fail, they usually fail fast: a puddle at 6 a.m., no hot water before work, or a rusty stream from the tap. If you are searching for water heater installation near me Rockville MD because your tank is 10 to 12 years old, that is the right call. We also handle rockville md water heater replacement for homeowners who want to upgrade to a 50-gallon unit or switch to tankless before the old one quits.
We size the unit to your household, install it to code, and test every tap before we leave.
We keep the job simple and predictable. You get a call-ahead, a clear scope, and a clean workspace when we leave. Here is what to expect from the first phone call to the final test.

Used to disconnect old water lines and cut copper or PEX tubing to size. A clean cut prevents leaks at the fitting and ensures a proper seal.

For soldering copper pipe connections on tank installs. We also carry a press tool for no-flame connections in tight spaces or where open flame is a risk.

Used to check gas connections and water fittings after the install. We test every joint before we leave, so you do not find a drip a week later.

If we suspect a hidden leak or a corroded line behind a wall, we run a camera to see the problem without tearing out drywall. It saves time and money.

Not used on every install, but if your old heater sent sediment into your plumbing, we can jet the lines clear. It restores flow to faucets and showerheads.

For clearing clogs that show up after a water heater swap. Sediment can block aerators and drains. We clear them before we leave.

We follow the current Maryland Plumbing Code and Montgomery County amendments for venting, T&P relief valves, expansion tanks, and gas line sizing. We pull the permit and meet the inspector on site. This protects you and ensures the install passes on the first try.

We calculate your hot water demand based on bathrooms, family size, and appliances. A 40-gallon tank works for two people; a 50-gallon for four; a tankless unit for endless hot water. We do not guess. We size it right so you do not run out.
We install a new 40- or 50-gallon tank and provide the permit and inspection paperwork. A new water heater is a selling point, and the buyer's inspector will not flag it as a risk. You get a clean inspection and a faster sale. The new unit adds value and removes a negotiation point.
We inspect the tank, check the anode rod, and give you an honest read on remaining life. If it is near the end, we install a new unit before it fails. We also check the shut-off valve and expansion tank. You avoid a surprise leak in your first year of ownership. You also get a baseline for maintenance going forward.
We calculate your peak demand and install a 50- or 75-gallon tank, or a tankless unit if you prefer endless hot water. We upsize the gas line if needed and run new venting for tankless. Everyone gets a hot shower. No more waiting 20 minutes between showers or running the dishwasher at midnight.
We install a commercial-grade Rheem or AO Smith unit, pull the permit, and coordinate with the health inspector if needed. We work after hours to avoid disrupting your business. You stay open and your customers have hot water. The new unit meets code and handles the higher demand of a commercial kitchen or salon.
Rockville has a mix of housing stock, and that affects how we install water heaters. In older neighborhoods like Twinbrook and Lincoln Park, many homes have 40-gallon tanks in tight utility closets with galvanized pipe that needs replacing. In newer areas like King Farm and Fallsgrove, we see more tankless units and PEX tubing. The water in Montgomery County is moderately hard, which wears out anode rods faster than in some other areas. That is why we check the anode rod on every install and recommend a flush once a year. Winter brings frozen pipes and higher demand for same day water heater installation Rockville MD calls. Summer is slower, which is a good time to replace an aging tank before it fails. If you need a new water heater install Rockville Maryland, we know the local code requirements and the common issues in each neighborhood. We pull the permit and meet the inspector, so you do not have to.
A 40-gallon tank from 2012 was leaking from the bottom and rusting the floor. The homeowner was mopping up water every morning and had no hot water by 7 a.m. The shut-off valve was frozen open.
We installed a new 50-gallon Rheem tank, replaced the shut-off valve and expansion tank, and replaced 6 feet of corroded galvanized pipe with copper. The job took four hours. Hot water was back by lunch, and the floor was dry.
Flush the tank once a year to remove sediment. Check the anode rod every two years and replace it when it is more than half consumed. We left a reminder tag on the new unit.
A family of five was running out of hot water with a 50-gallon tank. Morning showers were staggered, and the dishwasher ran at midnight. The gas line was undersized for a tankless unit.
We installed a Navien tankless unit, upsized the gas line from 1/2-inch to 3/4-inch, and ran new PVC venting through the side wall. The job took seven hours. Now two showers can run at once with no temperature drop.
Descale the tankless unit once a year with white vinegar to remove mineral buildup. We showed the homeowner how to isolate the unit and run the flush. It takes about 45 minutes.
A salon with six washing stations had a 75-gallon tank that was 15 years old and leaking. The owner was losing hot water during peak appointments and worried about closing for repairs.
We installed a new commercial-grade AO Smith 75-gallon tank after hours. The job took five hours, and the salon opened on time the next morning. The new unit meets code and handles the higher demand of six stations.
We set up a yearly service agreement to flush the tank and check the anode rod. The owner gets a reminder call before the appointment so they can schedule around clients.
Most people call us when something goes wrong. Here are the common problems we fix with a new install, and what happens if you wait too long.

We shut off the water, drain the tank, and install a new unit the same day. We also check for water damage and recommend a restoration company if needed. Most leaks stop the moment we disconnect the old tank. A leaking tank can dump 40 to 50 gallons on your floor, ruining drywall, carpet, and stored items. Mold can start within 24 to 48 hours.

We replace the tank and install a new anode rod. If your water is hard, we can add a sediment filter or recommend a water softener. You get clean, odor-free hot water the same day. Rust in hot water usually means the tank lining is failing. It will not improve, and the tank can start leaking without warning. Smelly water often means bacteria in the anode rod.

We size a new 50- or 75-gallon tank or a tankless unit based on your peak demand. If you have three bathrooms, a tankless unit rated for 8 to 10 gallons per minute keeps up with two showers at once. A 40-gallon tank in a four-person home runs out in 10 to 15 minutes of showering. That leads to cold showers, scheduling fights, and sometimes a bigger problem: a failing dip tube.

We flush the tank during the install and add a sediment filter if your water is hard. If the tank is over 10 years old, replacement is the better call. We haul the old unit away and install a new one with a fresh anode rod. Sediment builds up on the bottom of the tank and causes overheating. The popping is steam escaping through the sediment. It shortens the tank's life and raises your gas bill.
Modern tank water heaters carry higher Energy Factor ratings than units from 15 years ago. A new 50-gallon Rheem or AO Smith tank typically cuts water heating costs by 10 to 20 percent. If you switch to a Navien or Rinnai tankless, you only heat water when you turn on the tap, which saves more in smaller households.
Running out of hot water mid-shower is a sizing problem, not a repair problem. We calculate your peak demand based on bathrooms, appliances, and family size, then recommend a 40-, 50-, or 75-gallon tank or a tankless unit rated for your flow. You get a system that matches your household, not a guess.
Montgomery County Plumbing Code requires proper venting, a T&P relief valve, a drip leg on gas lines, and an expansion tank on closed systems. We pull the permit, install to code, and leave the paperwork with you. That matters when you sell the house or file an insurance claim after a leak.
A tank that is 10 years old with rust in the water or popping sounds is a leak waiting to happen. Replacing it on your schedule costs less than a burst pipe at 2 a.m. We also install new shut-off valves and supply lines so the next repair is easier and faster.
Typical 2026 pricing in Rockville for a standard 40- or 50-gallon tank install runs $1,200 to $1,800, including the unit, labor, permit, and haul-away. Tankless installs range from $2,800 to $4,500 because they often need a new gas line and venting. The price depends on the size and type of unit, the condition of your existing plumbing, and whether we need to replace corroded pipes or valves. We give you a firm quote before we start, so you know exactly what you are paying.
What your estimate is based on
$1,200 - $4,500 depending on unit type and scope A new water heater lasts 10 to 15 years for a tank and 20 for a tankless. Spread over that time, the cost is a few dollars a month. You get lower gas bills, reliable hot water, and a code-compliant install that protects your home's value.
Clear records you can keep and share.
Clear quote before we start
We pull it and meet the inspector
Old unit hauled away, floor wiped
Most homeowners wait until the tank leaks, but you can plan ahead. Knowing the signs of failure and your options helps you avoid an emergency.
Rusty water, popping sounds, and moisture around the tank mean it is near the end. A tank that is 10 to 12 years old is on borrowed time.
A tank stores hot water and costs less upfront. A tankless unit heats on demand, lasts longer, and saves space, but costs more to install.
A 40-gallon tank works for two people; a 50-gallon for four. If you have three bathrooms, consider a 75-gallon tank or a tankless unit.

Not sure if we cover your street? Call and ask. +1 (831) 293-1204
Most standard 40- or 50-gallon tank installs run $1,200 to $1,800 in 2026, including the unit, labor, permit, and haul-away. Tankless installs range from $2,800 to $4,500 because they often need a new gas line and venting. If you are wondering how much to install water heater in Rockville MD for your specific home, call us with your fuel type and current unit size and we will give you a firm range in minutes.
A standard tank swap takes three to five hours from arrival to hot water. Tankless conversions usually take six to eight hours because we upsize the gas line and run new venting. If we hit a corroded shut-off valve or a venting issue, we add time and tell you before we proceed. Most customers have hot water back the same day.
For a one- to two-bathroom home with two to three people, a 40-gallon tank is usually enough. Three to four people with two bathrooms typically need a 50-gallon unit. Homes with three or more bathrooms or a large soaking tub often do better with a 75-gallon tank or a tankless unit rated for 8 to 10 gallons per minute. We size it based on your peak demand, not a guess.
Yes. We install 40-, 50-, and 75-gallon tank water heaters from Rheem, AO Smith, and Bradford White. We also carry tankless units from Navien and Rinnai if you want to switch. Tank installs include a new expansion tank, shut-off valve, and supply lines. If you need a 50 gallon water heater installation Rockville MD, we usually have one on the truck and can install it the same day.
If your tank is leaking, rusting, or just not keeping up, call us. We give you a firm price over the phone, show up when we say we will, and leave you with hot water and a clean floor. Same-day and next-day slots are available.
Call us at +18312931204 or email [email protected]. We answer live calls 24/7 for emergencies and schedule standard appointments Monday through Friday, 8 a.m. to 6 p.m. If you leave a message after hours, we call back first thing the next morning. For urgent problems, call and we will dispatch a technician.