Flat-price quote
You know the cost before we start.
When a faucet drips, it wastes water and drives you crazy. Our faucet repair Rockville MD service stops leaks at the source, whether it's a worn cartridge, a corroded valve seat, or a failed O-ring. We work on Moen, Delta, Kohler, and American Standard fixtures throughout Montgomery County. One visit, and your faucet runs quiet and dry again.
Every faucet repair visit includes a full diagnosis, the repair itself, and a test to make sure everything works. We'll also check related components like supply lines and shut-off valves to prevent future leaks.


We fix dripping, leaking, and stiff faucets in houses, condos, and apartments across Rockville. Whether it's a kitchen or bathroom fixture, we restore smooth operation and stop the drip.
We keep faucets working in restaurants, offices, and retail spaces so your business doesn't skip a beat. From breakroom sinks to customer restrooms, we repair all types of commercial faucets.
Faucet repair Rockville MD is the process of diagnosing and fixing the internal components that control water flow and temperature. That means replacing worn cartridges, reseating valves, swapping out O-rings and springs, and clearing mineral buildup from aerators. We also check the shut-off valve and supply lines while we're under the sink. Most repairs take one to two hours, and we carry common parts for Moen, Delta, and Kohler on every truck.
In Rockville, faucet problems often trace back to hard water. The mineral content in our water supply leaves scale inside cartridges and valve seats, which causes drips and stiff handles. Older homes in neighborhoods like Twinbrook and Lincoln Park may still have original fixtures with corroded stems. If you're searching for faucet repair near me Rockville MD, we can usually get to you the same day and stop the leak before it damages your cabinet.
We find the worn part, replace it, and test until the faucet runs dry and smooth.
We keep it simple: diagnose, fix, test, and clean up. You'll know the price before we start and the results before we leave.

Used to loosen and tighten supply lines and shut-off valves without damaging the fittings.

Cuts copper or PEX tubing cleanly when we need to replace a section of supply line.

For soldering copper pipe connections when repairing or replacing supply lines.

Creates secure, solderless connections on copper or PEX pipe, ideal for tight spaces.

Helps us pinpoint hidden leaks in walls or under slabs before we start repairs.

Wrapped around threaded connections to ensure a watertight seal and prevent leaks.

We stock common parts for Moen, Delta, Kohler, and American Standard to complete most repairs in one visit.

We remove the old cartridge, clean the valve body, and install a new OEM or high-quality aftermarket cartridge. This restores smooth operation and stops drips.
We offer same-day service to replace the cartridge and stop the drip. We'll also check the supply lines and shut-off valve for any other issues. You sleep in silence and save water. The repair usually takes under an hour.
We diagnose the leak, which is often a worn O-ring or loose packing nut. We replace the faulty parts and test for leaks. Your cabinet stays dry, and you avoid mold and water damage. The repair is quick and affordable.
We disassemble the valve, clean mineral buildup, and replace the cartridge if needed. We also lubricate the moving parts. The handle turns smoothly, and you can adjust temperature easily. No more struggling to turn the water on.
We inspect the entire faucet and give you an honest assessment. If repair is cost-effective, we'll fix it. If not, we'll recommend a replacement. You make an informed decision and get a faucet that works reliably, whether repaired or replaced.
Rockville's water is moderately hard, which means mineral scale builds up inside faucets faster than in some other areas. That scale wears out cartridges and valve seats, leading to drips and stiff handles. Older homes in neighborhoods like Twinbrook and Lincoln Park often have original fixtures with corroded stems that need careful handling. We carry the right tools and parts to deal with these issues on the spot. Whether you need kitchen faucet repair Rockville MD or bathroom faucet repair Rockville MD, we tailor our approach to your fixture and water conditions. We also ensure every repair meets Montgomery County Plumbing Code Compliance. If you're searching for dripping faucet repair Rockville MD, we can usually schedule you the same day.
A homeowner in King Farm had a Moen kitchen faucet that dripped constantly, wasting water and staining the sink. The handle was also stiff and hard to turn.
We replaced the worn cartridge and cleaned the aerator. The drip stopped completely, and the handle now turns smoothly. The repair took 45 minutes, and the customer was thrilled.
We recommended wiping the faucet dry after each use and periodically removing the aerator to descale it. This extends the life of the cartridge.
In Twinbrook, a bathroom faucet leaked under the handle, causing water to pool in the cabinet. The O-ring and packing nut were worn, and the shut-off valve was corroded.
We replaced the O-ring, packing nut, and shut-off valve. The leak stopped, and the cabinet stayed dry. The repair took about an hour, and the customer avoided costly cabinet repairs.
We advised checking under the sink monthly for signs of moisture and tightening the packing nut if minor drips appear.
A homeowner in Rockville Heights had a stiff shower handle that was hard to turn. Mineral buildup had seized the cartridge, and the temperature was inconsistent.
We removed the cartridge, cleaned the valve body, and installed a new cartridge. The handle now turns easily, and the temperature is consistent. The repair took 90 minutes.
We suggested running hot water regularly to prevent mineral buildup and using a water softener if hardness is a recurring issue.
From constant drips to stiff handles, we've seen every faucet issue. Here are the most common problems we solve for Rockville homeowners.

We replace the worn cartridge or reseat the valve to stop the drip completely. Most repairs take under an hour, and you'll notice the silence immediately. Wastes thousands of gallons of water per year and can stain your sink. The sound alone can keep you up at night.

We replace the O-rings, seals, and packing nut to stop the leak. We also check the supply lines and shut-off valve for corrosion or wear. Water can seep into the cabinet, causing mold, rot, and damage to stored items. It often gets worse over time.

We disassemble the faucet, clean mineral buildup, and lubricate moving parts with NSF-approved grease. If the cartridge is worn, we replace it for smooth operation. Makes it hard to turn the water on or off and can lead to a broken handle or stripped stem. It's frustrating and can worsen quickly.

We clean or replace the aerator and flush the cartridge to remove debris. If the issue is in the supply lines, we'll diagnose and fix that too. Makes washing dishes and hands a chore. It's often caused by a clogged aerator or sediment in the cartridge.

We test the faucet and, if needed, check the water heater settings. Replacing the cartridge usually restores consistent temperature. We'll advise if a water heater repair is needed. You get scalded or frozen unexpectedly. This is often a sign of a failing cartridge or a problem with the water heater.
A single dripping faucet can waste over 3,000 gallons of water per year. That's like flushing your toilet 400 extra times. We replace the worn cartridge or seat to stop the drip completely, often in under an hour. You'll see the difference on your next WSSC water bill.
Leaking faucets don't just waste water; they can rot your cabinet floor, cause mold, and damage countertops. Fix leaking faucet Rockville Maryland issues before they spread. We inspect the supply lines and shut-off valve while we're there, so you won't trade one leak for another.
Stiff handles and inconsistent temperature are signs of internal wear. We clean or replace the cartridge and lubricate moving parts with NSF-approved grease. Your faucet will turn smoothly and hold temperature again. Most customers say it feels like a new fixture.
A full faucet replacement can cost $300 to $800 installed. A repair often runs $150 to $350 and solves the problem. If your fixture is less than 15 years old and the body isn't cracked, repair is usually the smarter call. We'll tell you honestly which option makes sense.
Faucet repair in Rockville typically costs between $150 and $350, depending on the complexity. Simple cartridge replacements are on the lower end, while repairs involving corroded parts or shut-off valve replacement cost more. We provide a flat-price quote before we start, so you know exactly what you'll pay. No hourly billing, no surprises. For a precise estimate, call us with your faucet brand and the issue you're experiencing.
What your estimate is based on
$150 - $350 Our pricing reflects the quality of parts and workmanship. We use OEM or high-quality aftermarket components and stand behind our repairs. You get a lasting fix, not a temporary patch.
Clear records you can keep and share.
You know the cost before we start.
We show you the worn cartridge or O-ring.
We wipe down the sink and cabinet.
A faucet repair fixes the internal components that control water flow. A replacement swaps the entire fixture. Most faucets can be repaired unless the body is cracked or corroded.
Faucets under 15 years old are usually good candidates for repair. Older fixtures may have obsolete parts that are hard to find.
Leaks from the spout or handle are typically repairable. Leaks from the base or body may indicate a crack that requires replacement.
A repair often costs half as much as a replacement. If the repair is straightforward, it's usually the better financial choice.

Not sure if we cover your street? Call and ask. +1 (831) 293-1204
Most faucet leaks in Rockville come from worn cartridges, damaged O-rings, or corroded valve seats. Hard water accelerates wear by leaving mineral deposits that tear seals. If your faucet drips from the spout, the cartridge is usually the culprit. If it leaks under the handle, O-rings or the packing nut are likely. We diagnose the exact cause and fix it on the spot.
Typical faucet repair in Rockville costs between $150 and $350, depending on the faucet brand, part availability, and accessibility. Simple cartridge replacements are on the lower end. Repairs that require replacing a shut-off valve or dealing with corroded parts cost more. We give you a flat-price quote before we start, so you know exactly what you'll pay.
Yes, we repair dripping faucets every day. A drip is usually caused by a worn cartridge, a damaged valve seat, or a failed O-ring. We carry replacement parts for major brands and can usually fix the drip in one visit. If the faucet body is cracked or severely corroded, we'll let you know if replacement is the better option.
If your faucet is less than 15 years old and the body isn't damaged, repair is usually the best choice. It costs less and keeps a fixture you already like. If the faucet is older, leaks from multiple points, or has a cracked body, replacement makes more sense. We'll give you an honest recommendation based on the condition and your budget.
Call now for same-day service. We'll stop the drip, fix the leak, and get your faucet working like new. Upfront pricing, no surprises.
Call us at +18312931204 or email [email protected]. We answer live calls 24/7 for emergencies and schedule standard appointments Monday through Friday, 8 a.m. to 6 p.m. If you leave a message after hours, we call back first thing the next morning. For urgent problems, call and we will dispatch a technician.